CW61160 horizontal light duty lathe machine for sell with good service
1.Detailed Product Description:
- This machine can operate various turning works, it can turn various
excircle, the bore of interface and endface of parts, independent
motor of upper tool-post can turn short taper,the cooperation of
upper tool-post and longitudinal feed can turn long taper.
- In addition, it can meet some requirements, such as drilling,
boring hole and nesting. And it is suitable for turning strongly solid carbide
cutting tools, and machining ferrous metals and non-ferrous metals.
- It can do external cylindrical surface turning, inner hole and end
face turning, groove broaching, drilling, boring and trepanning.
- It can also turn various intemal and external metric,inch module
and diametrical pitch threads,the top slide can be used
independently for turning of short taper.
- These lathes are of high power,high rigidity and wide rotating
speed range,so it can be used for high speed and strong force
2. Product parameters:
|Max. swing diameter over bed||mm||1600|
|Max. swing diameter over carriage||mm||1600|
|Max. length of workpiece||mm||3000|
|Max.weight of workpiece||ton||6|
|width of guide rail||mm||755|
|Feed speed (Cross)||mm||0.05-6|
|Feed speed (Upper tool-post)||mm||0.025-3|
|Number and range of metric thread||44; 1-120|
|Number and range of inch thread||31; 24-1/4t.p.i|
|Number and range of module thread||mm||45; 0.5-60|
|Number and range of diametrical pitch thread||38; 1/2-56DP|
|Rapid travel speed(longitudinal)||mm/min||3740|
|Rapid travel speed(Transverse)||mm/min||1870|
|Diameter of tailstock quill||mm||180|
|Travel of tailstock quill||mm||300|
|Taper hole of tailstock quill||Metric 80|
|Main motor power||kw||30|
Malaysia, Brazil, Vietnam, Iran, India, Indonesia, Qatar, Poland,
South Korea, Korea, Mexico, Saudi Arabia, etc.
ISO9001:2000;ISO9000:2000; ISO9001:2008; CE; CQC.